La description

Amplifier Unit, Main Unit, PNP
Model LV-11SBP*1
Type Main unit
Output PNP
Control output PNP open-collector x 2 ch 30 VDC max. 100 mA max. per output
Response time ExceptLV-S31 ULTRA 4 ms
SUPER 2 ms
TURBO 500 µs
FINE 250 µs
HSP 80 µs
LV-S31standard mode 500 µs
LV-S31standard mode SPED2 2 ms
SPED3 8 ms
SPED4 32 ms
LV-S31High-speed mode 250 µs
Control input Light emission stop input, external calibration, set value bank selection input, or shift input
Number of interference prevention units ULTRA 4*2
SUPER
TURBO 2*2
FINE
HSP 0*2
Unit expansion Up to 16 expansion units can be installed (17 units including the main unit)*3
Rating Power voltage 12 to 24 VDC, Ripple (P-P) 10 % or less, Class 2*4
Power consumption Normal 1.7 W max. (70 mA max. for 24 V)
Ratings Eco-Half Eco-All 1.55 W max. (65 mA max. for 24 V)
Environmental resistance Ambient temperature -10 to +55 °C (No freezing)*5
Vibration resistance 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z axis
Material Main unit Main body, cover: Polycarbonate
Weight Approx. 80 g (including 2 m cable)
*1 LV-S62 and LV-S63 can ONLY be used with amplifiers ending with B or BP. *2 Numbers for the LV-S31 are four in standard mode and two in high-speed mode. *3 To connect several units they must be mounted on a METAL DIN rail. Ensure that the output current is 20 mA max. With several units connected, the allowable ambient temperature range varies as follows: 1 to 2 units connected: -10 to +55?C (14 to 131?F) 3 to 10 units connected: -10 to +50?C (14 to 122?F) 11 to 16 units connected: -10 to +45?C (14 to 113?F) *4 When more than 8 units connected, be sure to use supply voltage 24 VDC Ripple (P-P) 10 % max. *5 To connect several units they must be mounted on a METAL DIN rail. Ensure that the output current is 20 mA max. With several units connected, the allowable ambient temperature range varies as follows: 1 to 2 units connected: -10 to +55 °C, 3 to 10 units connected: -10 to +50 °C, 11 to 16 units connected: -10 to +45 °C
''