La description

Stylus type General-purpose Sensor head (Low measuring force type)
Model GT2-P12L*1
Detection system Scale Shot System II, absolute (no tracking errors) type
Measuring range 12 mm
Resolution 0.5 ?m
Indicated accuracy 2 µm (p-p)*2
Measuring force Downward mounting 0.2 N*3
Side mounting 0.15 N*3
Upward mounting 0.1 N*3
Sampling cycle 4 ms
Mechanical response 4 Hz*2
Operation indicator light 2-colour LED (red, green)
Environmental resistance Enclosure rating -
Ambient temperature -10 to +55 °C (No freezing)
Relative humidity 35 to 85 % RH (No condensation)
Vibration resistance 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Shock resistance 1,000 m/s2 (IEC60068-2-27)
Materials Main body Main body case: SUS 303, Status indicator: PET, Sensor head-relay connector cable: PUR, Relay connector: PBT, Spindle of GT2-PA12K/PA12: SUS430 (Fluorine coating)
Dust boot -
Contact SUS304, SUS440C*4
Sensor head cable Optional (connect to relay connector)
Weight Approx. 35 g (not including cable)*5
*1 Note: You may not be able to connect the sensor head to the amplifier unit depending on when the amplifier unit was purchased.For details, contact your local sales office. *2 Value when the ambient temperature is 20 °C. *3 Representative value at the centre of the measuring range. Please note that the measuring force varies by the installation state of the dust boot. This is a representative value when using the GT2-PA12K/PA12 with a pressure of 0.25 MPa. The measuring force varies depending on the air pressure used. For details, see table 1. No dust boots are used with the GT2-PA12K/PA12. *4 Contacts are available as options sold separately. *5 Including the relay connector.
''