La description

Fibre Amplifier, Cable Type, Main Unit, NPN
Model FS-V21RM
Type Main unit: Monitor output, NPN
Light source Red, 4-element LED
Response time 250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /500 µs (HIGH RESOLUTION) /50 µs (HIGH SPEED)
Output selection LIGHT-ON/DARK-ON (switch-selectable)
Detection mode Light intensity/rising edge/falling edge
Shift function Max. ±1,999 (variable)
Timer function Mode Timer OFF/OFF-delay timer/ON-delay timer/One-shot timer, selectable
Variable range 1 to 30 ms (in 1 ms increments), 30 to 50 ms (in 2 ms increments), 50 to 200 ms (in 10 ms increments), 200 to 500 ms (in 50 ms increments)
Accuracy ±10 % of the Preset Value
Control output NPN open-collector 100 mA max. (40 VDC max.)*1, Residual voltage: 1 V max.
Monitor output 1 to 5 load resistance to display 0 - 495 for FINE and TURBO. Voltage output: 1 to 5 V, Load resistance: 10 k? min., Repeatability: ±0.5 % of F.S.
Unit expansion Up to 16 expansion units can be connected (a total of 17 units).*2
Mutual interference suppression HIGH SPEED/HIGH RESOLUTION: 0, FINE : 4, TURBO/SUPER/ULTRA: 8
Rating Power voltage 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Power consumption Normal S-APC OFF: 650 mW max.(27 mA max. at 24 VDC), S-APC ON: 720 mW max.(30 mA max. at 24 VDC)
ECO half S-APC OFF: 530 mW max.(22 mA max. at 24 VDC), S-APC ON: 660 mW max.(25 mA max. at 24 VDC)
ECO all S-APC OFF: 480 mW max.(20 mA max. at 24 VDC), S-APC ON: 550 mW max.(23 mA max. at 24 VDC)
Environmental resistance Ambient light Incandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.
Ambient temperature -10 to +55 °C (No freezing)
Relative humidity 35 to 85 % RH (No condensation)
Vibration resistance 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Shock resistance 500 m/s2, 3 times in each of the X, Y, and Z directions
Case material Polycarbonate
Size 30 mm (H) x 9 mm (W) x 70 mm (D)
Weight Approx. 80 g (including 2-m cable)
*1 20 mA at maximum for the expansion unit. *2 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less. 1 or 2 Units: -10 to +55 °C (14 to 131 °F), 3 to 10 Units: -10 to +50 °C (14 to 122 °F), 11 to 16 Units: -10 to +45 °C (14 to 113 °F)
''