La description

Fibre Amplifier, Cable Type, Expansion Unit, NPN
Model FS-N14N
Type High functionality 2 output Cable
Output NPN
Main unit/Expansion unit Expansion unit
Control output 2 NPN open collector 24 V, 1 output max: 100 mA or less, 2 output total: 100 mA or less (used stand-alone)/20 mA or less (multiple connections), residual voltage 1 V or less
Monitor output (1-5 V) -
External input 1 Input time 2 ms (ON)/20 ms (OFF) or more (25 ms or more (ON/OFF) when external calibration is selected.)
Response time 50 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA)
Multiple connections to Expansion units Up to 16 units can be connected total (two output type is treated as two units)
Light source Red, 4-element LED
APC ON/OFF switchable (Factory setting: OFF)
Number of interference prevention units 0 for HIGH SPEED, 4 for FINE, 8 for TURBO/SUPER/ULTRA/MEGA (When set to double, the number of interference-prevention units will be doubled.)
Rating Power voltage 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Current Consumption Normal: 900 mW or less (36 mA max. at 24 V, 48 mA max. at 12 V)*1 Eco on mode: 800 mW or less (32 mA max. at 24 V, 39 mA max. at 12 V)*1 Eco Full mode: 470 mW or less (19 mA max. at 24 V, 23 mA max. at 12 V)
Environmental resistance Ambient light Incandescent lamp: 20,000 lux or less, Sunlight: 30,000 lux or less
Ambient temperature -20 to +55 °C (No freezing)*2
Relative humidity 35 to 85 % RH (No condensation)
Vibration resistance 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Shock resistance 500 m/s2, 3 times in each of the X, Y, and Z directions
Case material Both main unit and expansion unit housing material: Polycarbonate
Weight Approx. 70 g
*1 Increases 100 mW (4.0 mA) for High Speed mode *2 One or two more units connected: -20 to +55 °C, 3 to 10 more units connected: -20 to +50 °C, 11 to 16 more units connected: -20 to +45 °C. When using 2-outputs, one unit is counted as two units. All temperature regulations are for when the unit is mounted on a DIN rail and installed on metal sheeting.
''