La description

Amplifier unit, Panel mount type
Model IL-1500
Type Panel mount
Main unit/Expansion unit Main unit
Head compatibility Compatible
Display Minimum displayable unit IL-S025/IL-030: 1 µm, IL-S065/IL-065/IL-100: 2 µm, IL-300: 10 µm, IL-600: 50 µm
Display range IL-S025/IL-030/IL-S065/IL-065/IL-100: ±99.999 mm to ±99 mm (4 levels selectable), IL-300/IL-600: ±999.99 mm to ±999 mm (3 levels selectable)
Display rate Approx. 10 times/sec.
Analogue voltage output ±5 V, 1 to 5 V, 0 to 5 V Output impedance 100 ?*1
Analogue current output 4 to 20 mA Maximum load resistance of 350 ?*1
Control input Bank switch input Non-voltage input*2
Zero-shift input
Stop emission input
Timing input
Reset input
Control output Judgment output Open collector output (NPN, PNP changeover possible/N.O., N.C. changeover possible)*3
Alarm output Open collector output (NPN, PNP changeover possible/N.C.)*3
Current Power voltage 10 to 30 VDC ripple (P-P) 10% included, Class 2*4
Power consumption 2500 mW or less (at 30 V: 84 mA or less)
Environmental resistance Pollution degree 2
Ambient temperature -10 to +50 °C (No condensation or freezing)
Relative humidity 35 to 85 % RH (No condensation)
Vibration resistance 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Material Case / Front sheet: Polycarbonate, Key tops: Polyacetel, Cable: PVC
Weight Approx. 170 g (including attachments)
*1 Select and use one of ±5 V, 1 to 5 V, 0 to 5 V or 4 to 20 mA. *2 Assign an input of your choice to the 4 external input lines before using. *3 The NPN open collector rated output is: 50 mA max./ch (20 mA when adding an expansion unit) less than 30 V, residual voltage less than 1 V (less than 1.5 V when adding over 6 units including the main unit) The PNP open collector rated output is: 50 mA max./ch (20 mA/ch when adding expansion units), less than power voltage, and less than 2 V residual voltage (less than 2.5 V when adding over 6 units including the main unit) *4 If there are over 6 additional expansion units, please use a power voltage of 20 to 30 V.
''